Nec 2 Of 5; Check Digit - Honeywell Vuquest 3310g User Manual

NEC 2 of 5

< Default All NEC 2 of 5 Settings >
NEC 2 of 5 On/Off
* On
Off

Check Digit

No Check Digit indicates that the scanner reads and transmits bar code
data with or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only
reads NEC 2 of 5 bar codes printed with a check digit, but will not transmit
the check digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only reads
NEC 2 of 5 bar codes printed with a check digit, and will transmit this digit
at the end of the scanned data. Default = No Check Digit.
* No Check Digit
Validate, but Don't Transmit
Validate and Transmit
7 - 12