Honeywell Bioptic Aux Port Configuration; Datalogic™ Magellan © Bioptic; Aux Port Configuration; Ncr Bioptic Aux Port Configuration - Honeywell Voyager 1250g User Manual

Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honeywell
bioptic scanner auxiliary port configuration. This bar code sets the baud rate to
38400 bps and the data format to 8 data bits, no parity, 1 stop bit. Character
RTS/CTS with timeout and 232 ACK/NAK are also enabled.
Note: If you are having unexpected results with this programming code, scan
the Activate Defaults bar code on
programming bar code above.
Datalogic™ Magellan

Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Datalogic
Magellan bioptic scanner auxiliary port configuration. This bar code sets the
baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan
the Activate Defaults bar code on
programming bar code above.

NCR Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for an NCR biop-
tic scanner auxiliary port configuration. This bar code sets the baud rate to
9600 bps and the data format to 7 data bits, Even parity, 1 stop bit and Message
RTS/CTS with timeout. The following prefixes are programmed for each sym-
bology:
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
2 - 10
Honeywell Bioptic Settings
©
Bioptic
Datalogic Magellan Bioptic Settings
Prefix
A
E0
FF
F
page 8-4 first, then scan the
page 8-4 first, then scan the
Symbology
Code 39
Interleaved 2 of 5
All other bar
codes
Prefix
B1
B2
B3