Upc-E1 - Honeywell Vuquest 3310g User Manual

UPC-E0 Leading Zero
This feature allows the transmission of a leading zero (0) at the beginning
of scanned data. To prevent transmission, scan Off. Default = On.
* On
UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On

UPC-E1

Most U.P.C. bar codes lead with the 0 number system. For these codes, use
UPC-E0 (page 7-29). If you need to read codes that lead with the 1 number
system, use the UPC-E1 On selection. Default = Off.
UPC-E1 On
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* UPC-E1 Off
7 - 31