Scan the following bar code to set the communication check character type.
Default = None.
* None
LRC Starts on 2nd Character
Intercharacter, Interfunction, and
Intermessage Delays
Some terminals drop information (characters) if data comes through too quickly.
Intercharacter, interfunction, and intermessage delays slow the transmission of
data, increasing data integrity.
Intercharacter Delay
An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may
be placed between the transmission of each character of scanned data.
Scan the Intercharacter Delay bar code below, then scan the number of
5ms delays, and the Save bar code using the
the back cover of this manual.
Prefix
Scanned Data
1
2
3
Intercharacter Delay
Intercharacter Delay
LRC Starts on 1st Character
Programming Chart
Suffix
4
5
CRC
inside
4 - 5