Table of Contents
Advertisement
Maintenance
Lubrication Points
Points that need to be kept lubricated are shown in the fi gures below. The front trunnion, rear trunnion, and
sector gear are most easily accessed through the motor cover opening with the blade tilted to 45º. The
sector gear should be lubricated on both sides that run along the teeth as well as the teeth. The worm gear and
threaded rod can be accessed through the rear access panel with the blade tilted to 45º.
rear trunnion
bracket
front trunnion
bracket
sector gear
Fig. 128
tilt handwheel
shaft bushing
Fig. 129
elevation handwheel
shaft bushing
threaded rod
pinion gear
worm gear
SawStop 10" Professional Cabinet Saw
87
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PCS175 and is the answer not in the manual?
Questions and answers
my sawstop saw tilts to 20 deg and thin it's like the gear is stripped it justs bounces
If the SawStop PCS175 saw tilts to 20 degrees and bounces as if the gear is stripped, it may be due to a problem with the tilt mechanism components such as the tilt handwheel, sector gear, worm gear, or threaded rod. These parts are involved in adjusting and holding the blade at the desired tilt angle. If they are worn, damaged, or not properly lubricated, the tilt movement may not be smooth, causing bouncing or slipping. Checking for damage and ensuring proper lubrication of the tilt mechanism is recommended.
This answer is automatically generated