Accessories
SawStop recommends the following accessories for use with your SawStop
Contact your local authorized SawStop Dealer or SawStop at 1-866-SAWSTOP for more information.
1. SawStop Brake Cartridges:
Standard Brake Cartridge for 10 inch saw blades
Dado Brake Cartridge for 8 inch dado sets
2. Precision Saw Blades:
40 Tooth Combination Saw Blade
60 Tooth Professional Saw Blade
Titanium Series 40 Tooth ATB Combination Rip Blade
Titanium Series 80 Tooth ATB Plywood / Laminate Blade
3. Table Inserts:
Standard Zero-Clearance Table Insert Assembly (with Lock-Down Lever)
(phenolic core with melamine surface)
Dado Zero-Clearance Table Insert Assembly (with Lock-Down Lever)
4. Rip Fences and Extension Tables:
Premium Fence Assembly (includes fence, rails and extension table)
T-Glide™ Fence System - Professional Series II
Fence Assembly
36 Inch Rails Assembly
36 Inch Extension Table Assembly (for use with 36 inch rails)
52 Inch Rails Assembly
52 Inch Extension Table Assembly (for use with 52 inch rails)
5. Miscellaneous Accessories:
Micro Guard Blade Guard Assembly
Dust Collecting Blade Guard Assembly
Over-Arm Dust Collection
Riving Knife
Miter Gauge Assembly
Professional Cabinet Saw Mobile Base
Mobile Base Conversion Kit (The conversion kit is for use with the
Industrial Mobile Base p/n MB-IND-000 which must be ordered separately.)
30 Inch Out-Feed Table
Push Stick
®
Professional Cabinet Saw.
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
p/n
SawStop 10" Professional Cabinet Saw
TSBC-10R2
TSDC-8R2
PCS-182
CB104 184
BTS-R-40ATB
BTS-P-80HATB
TSI-SLD
TSI-DLD
TSA-PFA
TGP2-FA
TGP2-R36A
TGP2-T36A
TGP2-R52A
TGP2-T52A
TSG-MG
TSG-DC
TSA-ODC
PCS-161
PCS-220
MB-PCS-000
MB-IND-500
OFT30-CNS-000
PCS-241
113
Need help?
Do you have a question about the PCS175 and is the answer not in the manual?
Questions and answers
my sawstop saw tilts to 20 deg and thin it's like the gear is stripped it justs bounces
If the SawStop PCS175 saw tilts to 20 degrees and bounces as if the gear is stripped, it may be due to a problem with the tilt mechanism components such as the tilt handwheel, sector gear, worm gear, or threaded rod. These parts are involved in adjusting and holding the blade at the desired tilt angle. If they are worn, damaged, or not properly lubricated, the tilt movement may not be smooth, causing bouncing or slipping. Checking for damage and ensuring proper lubrication of the tilt mechanism is recommended.
This answer is automatically generated