Table of Contents
Advertisement
23. USE THE RIGHT TOOL. Do not try to force the saw to do something it was not designed to do. Don't force a
tool or attachment to do a job for which it was not designed. Use the right blade for the job.
24. Never leave the saw running unattended. Wait until the blade comes to a complete stop and then turn the main
power switch to OFF and unplug the power cord when you are fi nished using the saw.
25. Turn the main power switch to OFF and unplug the power cord before servicing the saw and when changing
components or accessories such as blades, brake cartridges, and the like.
26. MAINTAIN TOOLS WITH CARE. Maintain the saw as specifi ed in this manual. Keep tools sharp and clean for
best and safest performance. Follow instructions for lubrication and changing accessories.
27. Use only recommended accessories with the saw. Consult this manual for recommended accessories. The use
of improper accessories may cause risk of injury. When servicing, use only identical replacement parts.
28. Keep the top of the saw clean and free from clutter. Cluttered areas invite accidents.
WARNINGS
!
SawStop 10" Professional Cabinet Saw
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PCS175 and is the answer not in the manual?
Questions and answers
my sawstop saw tilts to 20 deg and thin it's like the gear is stripped it justs bounces
If the SawStop PCS175 saw tilts to 20 degrees and bounces as if the gear is stripped, it may be due to a problem with the tilt mechanism components such as the tilt handwheel, sector gear, worm gear, or threaded rod. These parts are involved in adjusting and holding the blade at the desired tilt angle. If they are worn, damaged, or not properly lubricated, the tilt movement may not be smooth, causing bouncing or slipping. Checking for damage and ensuring proper lubrication of the tilt mechanism is recommended.
This answer is automatically generated