Do you have a question about the PCS175 and is the answer not in the manual?
Questions and answers
Bryan Fletcher
April 7, 2025
my sawstop saw tilts to 20 deg and thin it's like the gear is stripped it justs bounces
1 comments:
Mr. Anderson
April 9, 2025
If the SawStop PCS175 saw tilts to 20 degrees and bounces as if the gear is stripped, it may be due to a problem with the tilt mechanism components such as the tilt handwheel, sector gear, worm gear, or threaded rod. These parts are involved in adjusting and holding the blade at the desired tilt angle. If they are worn, damaged, or not properly lubricated, the tilt movement may not be smooth, causing bouncing or slipping. Checking for damage and ensuring proper lubrication of the tilt mechanism is recommended.
Need help?
Do you have a question about the PCS175 and is the answer not in the manual?
Questions and answers
my sawstop saw tilts to 20 deg and thin it's like the gear is stripped it justs bounces
If the SawStop PCS175 saw tilts to 20 degrees and bounces as if the gear is stripped, it may be due to a problem with the tilt mechanism components such as the tilt handwheel, sector gear, worm gear, or threaded rod. These parts are involved in adjusting and holding the blade at the desired tilt angle. If they are worn, damaged, or not properly lubricated, the tilt movement may not be smooth, causing bouncing or slipping. Checking for damage and ensuring proper lubrication of the tilt mechanism is recommended.
This answer is automatically generated