Polarity-Inverse - AddPac VoiceFinder AP2120 User Manual

VoiceFinder AP2120 VoIP Gateway User's Guide Version 1.00
5.7.4.13.4. Usage Guideline
Use the session-target command to specify a network-specific address or
domain name for a dial peer. Whether you select a network-specific address or
a domain name depends on the session protocol you select.
5.7.4.13.5. Example
The following example configures a session-target IP address "211.238.1.1".
dial-peer voice 10 voip
session-target 211.238.1.1
5.7.4.14.

polarity-inverse

To activate polarity-inverse of FXS voice port. Use "no" to disable this function.
polarity-inverse
no polarity-inverse
5.7.4.14.1. Syntax
There is no any specific keyword and argument in this command.
5.7.4.14.2. Default Value
disable
5.7.4.14.3. Command Mode
Voice-port Configuration Mode
5.7.4.14.4. Usage Guideline
When PBX supports billing function and the start and end points are indicated
by polarity inverse, activate this functin. Then PBX Trunk line connected to FXS
starts billing. Normally, the function is not necessarily to activate.
AddPac Technology Co., Ltd.
275
- -