Debug Voip - AddPac VoiceFinder AP2120 User Manual

VoiceFinder AP2120 VoIP Gateway User's Guide Version 1.00
undebug voip call
5.7.6.17.

debug voip

To trace events related to VoIP ASN.1, use the administrator command mode
"debug VoIP"
debug voip { h225-asn1 | h245-asn1 | ras-asn1 }
no debug voip { h225-asn1 | h245-asn1 | ras-asn1 }
5.7.6.17.1. Syntax
Keyword / Argument
h225-asn1.
h245-asn1
ras-asn1
5.7.6.17.2. Default Value
No Default Value
5.7.6.17.3. Command Mode
Administrator command
5.7.6.17.4. Usage Guideline
This command traces H.225 ASN.1, H.245 ASN.1, and RAS ASN.1 events, to
display it on the console port. This command may effect system performance,
therefore it is advised to disable this function under normal circumstances.
Information
Users can see VoIP-related messages and call tracing through the console port.
This is default setting. However, if the user wishes to view call tracing through
the telnet terminal from a remote place, the user shall use "debug-port"
command (one of the global commands) from the remote terminal. Message
tracing operates either in the console or in the remote terminal wherever
"debug-port" command has been used. If the telnet terminal is terminated,
AddPac Technology Co., Ltd.
Description
Trace H.225 ASN.1 event
Trace H.245 ASN.1 event.
Trace RAS ASN.1 event
321
- -