Yellow color wheel Er
(Yellow color wheel- error) This message will appear after the reset of the fixture if the magnetic-
indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The Yellow color wheel is not located in the default position
after the reset.
Color wheel Er
(Color wheel- error) This message will appear after the reset of the fixture if the magnetic-
indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective
(or its driving IC on the main PCB). The color wheel is not located in the default position after the
reset.
Zoom Er
(Zoom-error) This message will appear after the reset of the fixture if the magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its
driving IC on the main PCB). The Zoom is not located in the default position after the reset.
TechnoArc
User Manual
TM
General Maintenance and Troubleshooting
CHAPTER 6
53