Display Setting; Shutoff Time; Flip Display; Key Lock - High End Systems TechnoArc User Manual

Display Setting

This Set option lets you control how the display functions.
To select the Display Setting menu
1. Navigate to and select the Set menu as shown on page 29.
2. Using the
3. Using the
to select.
4. Using the

Shutoff Time

This option lets you determines when the display automatically shuts off after the last button
push. You can choose a delay from 01 – 60 minutes. The default delay setting is 02 minutes.

Flip Display

Use this option to rotate the display 180° when that orientation is easier to view. Off is the default
setting. Select On to flip the display. Note that this option only takes affect once you exit the
menu system using the

Key Lock

This display setting lets you activate a key lock. Off is the default. Select On to activate the key
lock and then press and hold the
the menu.

Temp C/F

This options sets the temperature scale to Celsius or Fahrenheit. Celsius is the default setting.

Reset Default

This Set option lets you return all factory options. A Technospot fixture ships with the following
factory default settings:
Pan Invert = Disabled
Tilt Invert = Disabled
Data Source = DMX
Pan Degree = 540
To reset defaults:
1. Navigate to and select the Set menu as shown on page 29.
2. Using the
3. Using the
TechnoArc User Manual
TM
buttons, scroll to Display Setting and press the
buttons, scroll to one of the display options below and press the
buttons, scroll to the desired setting and press the
MODE/ESC button.
MODE
/ ESC
MODE/ESC button for 2 seconds when you want to unlock
MODE
/ ESC
Encoders = On
Display Level = On
Hibernation = 15M
Movement Speed = Speed 1
buttons, scroll to Reset Defaults and press the
buttons, scroll to Yes and press the
button to select.
button to select.
Fan Control = Auto Fan Speed
No DMX Mode = Shutter Closed
Lamp On/Off = On
Temp C/F = Celsius
button to select.
button to select.
CHAPTER 3
Menu System
button
31