Cabling Dvd Drive - IBM System x3550 M4 Installation And Service Manual

Figure 102. SPECpower cable connection

Cabling DVD drive

The internal routing and connectors for the DVD drive.
Notes:
1. To disconnect the optional optical drive cable, you must first press the
2. Follow the optical drive cable routing as the illustration shows. Route the cable
3. Make sure that the cable is not pinched and does not cover any connectors or
204
IBM System x3550 M4 Type 7914: Installation and Service Guide
connector release tab, and then disconnect the cable from the connector on the
system board. Do not disconnect the cable by using excessive force.
from the connector on the system board along PCI assembly 1. Do not bend the
cable under PCI assembly 1.
obstruct any components (for example, the ServeRAID adapter or PCI assembly
1) on the system board.