IBM System x3550 M4 Installation And Service Manual page 746

201-826-001 • 201-826-003
201-826-001 Standalone Memory Test Aborted
Explanation: BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
201-826-002 Standalone Memory Test Aborted
Explanation: BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
201-826-003 Standalone Memory Test Aborted
Explanation: BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
728
IBM System x3550 M4 Type 7914: Installation and Service Guide