Reports; How To Print Out Reports; Generated Reports; Report Contents - ELCOM Euro-2100 User Manual

Reports

How to print out reports

There are two modes for printing reports: "X"
mode and "Z" mode.
Use the reading functionality of "X" mode if
it is necessary to obtain sales information since
the last resetting. It is used to generate reports
during the day, between two shifts, etc. The re-

Generated reports

Report "X" mode
Department
PLU
Cashier
Financial
Total (daily)
Periodical

Report contents

Department report

When printing a full department report, only
departments with non-zero sales are printed.
Report contains:
1) Name of the department
2) Number of items sold in the department
3) Total value of the items sold in depart-
ment
4) Total value of sales including all depart-
ments
In the "Z" mode it is possible to print the de-
partment report only within the total "Z" re-
port. See chapter on total daily "Z" report.
Reports
ading may be made in any numbers. It does
not affect the cash register memory.
Use the resetting functionality of "Z" mode
when you need to print reports and to clear the
register's memory. "Z" report is usually carried
out once a day after finalising the daily report.
"Z" mode
In the "Z" mode the department report, the
•
cashiers report and the financial report are car-
ried out within the total "Z" report.
• •
•
•
• •
• •

PLU report

Three different types of PLU reports can be
printed: the individual PLU report, report of
PLU range, and the full PLU report. Each of
these types can contain the PLU number (de-
pends on the report mode) or calling and stock
status according to the setting of second PLU
flag.
When printing a PLU report, only PLUs with
non-zero sales are printed.
A PLU report contains:
1) Number of the PLU (selective according to
the mode of report function calling).
Euro 2100
© Elcom, s. r. o.
51