System Flags Correction; Printing Flags Values; Flag 1 - Number Of Decimal Places, Method Of Rounding, Tax System; Flag 2 - Tax Printing, Number Of Logo Lines, Blank Lines - ELCOM Euro-2100 User Manual

© Elcom, s. r. o.
Figure 3.1 >
First system
flag values.
Figure 3.2 >
Second system
flag values.
Figure 3.3 >
Third system
flag values
20

System flags correction

1) To change the setting of any of the system
flags, switch the cash register into the "P"

mode by pressing
2) Enter the flag number to be edited and

press the (RA) button.
3) Enter desired flag value and press the

(Subtotal) button.
4) Print the new programmed settings by

pressing the (Check) button.
Flag 1 – Number of decimal places, method of rounding, TAX system...
Digit Default Meaning
setting
1 0 System of rounding:
2 0 Tax system:
3 2 No. of decimal places to which total price
should be rounded
4 2 No. of decimal places to which VAT should
by rounded
5 2 No. of decimal places to which price should
be rounded
6 2 No. of decimal places to which price, VAT
should be displayed

Flag 2 - TAX printing, number of logo lines, blank lines...

Digit Default Meaning
setting
1 1 TAX values printing
2 0 Date format
3 3 No. of decimal places of amount values
4 2 Number of blank lines between succeeding
receipts
5 6 Number of logo lines
6 0 Split pricing/successive multiplication entries

Flag 3 - Receipt consecutive number, cash register number

Digit Default Meaning
setting
1 0 Receipt consecutive number clearing
2 – 3 01 Cash register number
4 – 7 0001 Receipt consecutive number

Flag 4 - Required operations

Digit Default Meaning
setting
1 1 Subtotal amount printing after Subtotal key
is pressed
Euro-2100
5) Finish the programming by pressing the


Printing flags values

.
In the programming mode, select the flags
programming by pressing the
button. Press the
the flags values. It is possible to print the value
of currently programmed flag by pressing the

(EAN) button.
Programming manual
(Total) button.

(Check) button to print
Valid values
0 – up from 5, 1 – always up, 2 –
always down, 3 –special rounding
0 – VAT
1 – TAX
0 – 3
Valid values
0 – TAX values not printed,
1 – TAX values printed on receipt
0 – dd-mm-yy, 1 – mm-dd-yy
0 – 3
0 – 6)
0 – split pricing, 1 – successive
multiplication
Valid values
0 – after "Z" total (daily) report, 1
– after "Z" periodical report
(01 – 99)
(01 – 9 999)
Valid values
0 – no, 1 – yes

(RA)