Mode Switch; Paper Ribbons Installation - ELCOM Euro-2100 User Manual

© Elcom, s. r. o.
16
The Euro-2100 customer display is an alphanumeric LCD display (the display type is identical
with the cashier display).
The customer display has back-light installed
by default.

Mode switch

By combining the numerical keys from
%
to and the (Mode) button it is possib-
le to set the mode of the cash register. Such
switching thus enables the operator to work
in different cash register modes (registration,
programming, reports, etc.).
„R" Registration mode. This mode is used
15-12-2005
R
for all registrations and transactions. After
switching into this mode, the topical time in
the first line and topical date and day in the se-
cond line appears on the display until you be-
15-12-2005
X
gin registration.
Switching into the „R" mode:
15-12-2005
Z
operated for certain time limit (see chap. 3.3.9,
Flag 6, Digit 5) and it is supplied from internal
power supply, it will switch into the "Standby"
mode. A cash register in the "Standby" mode
has a low consumption of energy. The notifi-
cation "Standby" appears on the display.
Euro-2100
11:07:39
11:07:39

11:07:39
Cash register characteristics
„X" The „X" mode is used to print sales re-
ports. The printing of "X" reports does not re-
set the current sales data.

Switching into the „X":
15-12-2005
P
„Z" The „Z" mode is used to print various
reports. The printing of "Z" reports resets the
cash register sales data.

Switching into the „Z":
„P" The "P" program mode is used to
program all values and functions of the cash
15-12-2005
T
register.
Switching into the "P" mode:
„T" The training mode provides all functions
of the "R" mode, but in this mode, the transac-
tions are not included in the daily or monthly
(periodical) reports. The receipts printed in
this mode are marked by the text "Invalid do-
cument".
Switching into the "T" mode:
„STANDBY" When the cash register is not
STANBY
Exit the "STANDBY" mode by pressing the
(Mode) button. In case the cash-register is sup-
plied from external power supply then stand
by mode is not called.

Paper ribbons installation

11:07:39
11:07:39