Software Update; Save/Reboot - Kraun Wireless ADSL2/2plus Modem Router 54Mbps User Manual

4.5.5.2 IP address
(1) Click "IP Address" to display the
window shown in the right figure.
Here you may add/delete addresses
or address ranges permitted to
access the device remotely.
Access Control Mode: Enable, Disable.
When enabled, the IP address allowed may
access the web management page.
(2) Click "Add" to display the window
shown in the right figure.
You may enter an IP address or address
range permitted by the system to access
the web management page.
Click "Save/Apply" to activate the settings.
4.5.5.3 Password
(1) Click "Password" to display the
window shown in the right figure.
Here, you can modify the password
for logging in to the Management
page.
Enter the old login password, and
then the new login password. If the
former login password is correctly
entered, click "Save/Apply" to
modify the login password.
NOTE: For the sake of security, we
highly recommend you to change
the initial user name and password.
(2) Click "Save/Apply" to activate the
modification.

4.5.6 Software update

4.5.6.1 Click "Update Software" to display
the window shown in the right figure. Click
"Browse" to select your update file, and
then click "Update Software".

4.5.7. Save/Reboot

4.5.7.1 Click "Save/Reboot" to display the
window shown in the right figure.
Rebooting device will activate modified
settings. Note that network connections are
disrupted during the reboot process.
Wireless ADSL2/2+ Modem Router 54Mbps
43 www.kraun.it