Dhcp; Wlan; Basic Settings - Kraun Wireless ADSL2/2plus Modem Router 54Mbps User Manual

4.2.8.4 Click "Save/Apply" to activate the
settings.

4.3 DHCP

4.3.1 Click "DHCP Server" to display the
window shown in the right figure.
4.3.1.1 You can click "Disable DHCP
Server" or "Enable DHCP Server".
4.3.1.2 Start IP Address: Start address of
the DHCP server IP pool
4.3.1.3 End IP Address: End address of the
DHCP server IP pool
4.3.1.4 Leased Time: Validity period of the
IP address obtained. Click "Save".
4.3.2 Click "DHCP Client List" to view
the list of the clients with allocated
DHCP service.

4.4 WLAN

4.4.1Basic settings

4.4.1.1 Click "WLAN" to display the window
shown in the right figure.
(1) Enable Wireless: Enable or disable
the wireless feature.
(2) Hide Access Point: Hide your
access point to avoid detection by
passive scanning.
(3) SSID: Service Set ID. It is the
network name of the wireless
signal. Change to suit your needs.
(4) Country: The device will
automatically adopt the channel
frequency specifications for each
country.
Wireless ADSL2/2+ Modem Router 54Mbps
32 www.kraun.it