Video Camera Control Feature - Honeywell L5200 Series User Manual

The LYNX Touch L5200 supports up to 20 video cameras and provides the capability to view live video from a
single Camera. The installation of a WiFi Communications module and a WiFi internet connection are required.
Check with your installer to see if this features is available.
Selecting a Camera
Ready To Arm
1 : 2 35
PM
October 1, 2013
Security
Mostly Sunny
68
F
Feels Like 71 F
5-Day Forecast
News
Ready To Arm
Cameras
Name IP
Ready To Arm
Cameras
Name IP
Name 10.10.150.176
Name 10.10.150.159
Name 10.10.150.158
Name 10.10.150.67
Ready To Arm
Cameras
Name IP
Pool 10.10.150.176
Name 10.10.150.159
Name 10.10.150.158
Name 10.10.150.67
Ready To Arm
POOL
1. With the system in the disarmed or armed state, select the
Automation Video
Traffic Notices
5200-100-001-V0
2.
MAC Note: The latter can occur if a WiFi connection is lost.
Back
3. A Manual scan can be performed by selecting the "Scan"
Note: Up to 20 cameras will be viewable during scanning/
Scan
5200-100-010-V0
4. Select the desired camera from the list. If applicable select
MAC
00:C0:02:7B:67:E4
Back
00:C0:02:8F:60:4E
00:0E:8F:79:C7:EF
00:0E:8F:79:CB:C2
Scan
5200-100-007-V1
5. The selected camera is highlighted in green. To edit the
MAC
Back
6. To edit the camera name tap the highlighted camera again.
00:C0:02:7B:67:E4
00:C0:02:8F:60:4E
Note: To de-select a camera "tap" the highlighted camera two times.
00:0E:8F:79:C7:EF
7. Select the "Clear" button on displayed keypad, then enter the
Edit
00:0E:8F:79:CB:C2
Scan
8. Select "Done".
5200-100-093-V1
9. Select the "Back" button.
10. The system displays video from the selected camera.
11. To select a different camera, select the camera button then
1 2
12. Refer to the Video Camera Controls table for information
3 4
5200-100-008-V0

Video Camera Control Feature

Video icon. The system advances to Cameras screen
If no cameras have been discovered or if a list of discovered
cameras is invalid, a Camera scan will start automatically.
button. When the scan is complete the available cameras will
be displayed.
enrollment however, only four will appear on each page.

the " " button to view additional pages of the list. Select the

" " button to return to the previous page of the list.
camera name go to step 6 OR to save the camera go to step
9.
After the highlight color changes to yellow, select the edit
button.
deisred text.
tap the selected camera two times and repeat steps 4 to 9 as
applicable.
regarding the Video Function buttons. The available controls
are dependent upon the cameras that have been installed
.
and selected
– 57 –
USER FUNCTIONS