Honeywell L5200 Series User Manual page 21

Armed Away
Disarm
10:18 AM June 8, 2010
If an invalid User Code is entered or if a valid user code has not been entered within 10 seconds, the system will
return to the "home" screen and it will not be armed.
Silent Exit Feature
If Silent Exit feature is enabled when the LYNX Touch is armed AWAY, the Exit beeps will be silenced. In
addition, the panel will double the exit delay time before arming AWAY.
Ready To Arm
Arm Away Arm Stay
Delay
10:18 AM June 8, 2010
Ready To Arm
Arm the system in Away
mode
Enter Code:
Silent Exit
Cancel Quick Arm
Armed Away - Exit Now
Exit now
28 seconds
Disarm Restart
10:18 AM June 8, 2010
Zones
System
Message Phone
More
5200-100-020-V0
Zones System
Message Phone
More
5200-100-014-V0
1 2 3
4 5 6
7 8 9
Clear 0
5200-100-018-V0
Zones
System
Message Phone
More
5200-100-019-V0
4. At the end of the exit delay the system will announce "Armed
Away" and displays the "Armed Away" screen.
1. Select the Arm Away icon, the system displays a keypad.
2. Select the Silent Exit button. If enabled, the Silent Exit button
turns green. Enter a valid User Code.
OR
If Quick Arm has been enabled, select the "Quick Arm" icon.
3. The system beeps two times and announces "Armed Away
Exit Now. The exit delay screen is displayed. If programmed
the display counts down the time remaining in the exit delay
in seconds.
– 21 –
SECURING THE PREMISES
Arming the System