Honeywell L5200 Series User Manual page 42

USER FUNCTIONS
Clock/Calendar
Ready to Arm ...
1
4
Enter Time
10:21 AM
7
AM / PM
Clear
Ready To Arm
Time Zone
Eastern (EST)
Day Light Savings Time
Yes
Start Month
March
End Month
November
Ready To Arm
January February
March April
May June
July August
8. If the displayed time is not correct, select "Clear" then enter
2 3
9. When you have finished select the "" icon. The system
6
5
8 9
0 Save
5200-100-049-V0
10. Select "Time Zone". The system scrolls between through the
Start Week
Second
End Week
Save
First
5200-100-050-V0
11. Select "Day Light Savings Time". The system toggles between
Note: The start month/week and end month week are default
12. Select "Start Month". The system displays a calendar. Select
13. Select "Start Week". The system will toggle between:
5200-100-051-V0
14. Select "End Month". The system displays a calendar. Select
15. Select "End Week". The system will toggle between:
16. When you are finished select the "Save" key. The system
the correct time (4 digits) on the keypad and select AM or PM.
advances to the next screen OR proceed to step 17.
following options:
Eastern (EST)
Central (CST)
Mountain (MST)
Pacific (PST)
Hawaii (HAST)
Alaska (AKST)
Brasilia (BRT)
Mid-Atlantic (MAT)
Atlantic (AST)
Newfoundland (NT)
Select the correct time zone.
"Yes" and "No".
programmed to "March/Second"
respectively. Steps 13 to 16 should only be performed if you wish
to change those entries. If you are not changing the defaults,
advance to step 17.
the correct month.
Second
Third
Fourth
Last
Next to Last
3rd from Last
First
the correct month.
First
Second
Third
Fourth
Last
Next to Last
3rd from Last
returns to the Master User program screen.
– 42 –
and "November/First"