System Overview; Features - Honeywell L5200 Series User Manual

General Information
This system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration
of your system. The system consists of a touch screen control for system operation, various wireless sensors that
provide perimeter and interior burglary protection, and optional smoke or combustion detectors to provide early
fire warning. In addition, optional wireless keypads or key fobs may have been installed to allow you to control
the system away from the touch screen control. The system may also be used as a speaker phone.
The system monitors protection zones and system status, displays appropriate information on the touch screen
display, and initiates appropriate alarms. Your system may also have been programmed to automatically send
alarm or status messages over the phone lines or via the cellular/GSM network or the internet to a central
alarm monitoring station, and may also be capable of two-way voice communication with the central station.
Your key fob is similar to your keys or access card. If lost or stolen, another person can compromise your security system.
Immediately notify your Dealer/Installer of a lost or stolen key fob. The Dealer/Installer will then remove the key fob programming
from the security system.
The user features of this security system are listed below. Ask your installer which features have been
programmed for your system.
• Stay and Away arming modes: By using these modes you can protect either the perimeter only, or the
entire premises.
• Panic key functions: A designated key allow you to manually activate fire, medical emergency, or silent
police alarms. Refer to the Panic Keys section for detailed information.
• Follow me reminder announcements: Allows the panel to dial a number that you have specified, at a
programmed day/time and deliver a message programmed by your installer.
• Real-time clock: Touch screen displays current date and time. Refer to the Clock/Calendar section for
procedures for setting the time.
• Message center: The system allows recording and play back of brief voice messages. Refer to the
Recording/Playback Messages section for procedures.
• Two-way voice: Allows the central station to listen, talk to or conduct two-way conversations with
individuals on the premises
• Phone Control: Provides a remote interactive phone capability that permits access to the security system
from any off-site touch-tone telephone. Refer to the Remote Phone Control Feature section for detailed
information.
• Speaker Phone: The system is capable of operating as a speaker phone allowing hands free telephone
conversation. Refer to the Speaker Phone Feature section for detailed information.
• Security Codes: The system is capable of supporting an Installer code, Master user code and 30 additional
User codes including Guest and Duress codes. Refer to the User Access section for detailed information.
• Device activation: Allows you to send "Follow-Me" or e-mail messages, as a result of a system event such as
an alarm or trouble condition. Refer to the Automation section for detailed information.
• Schedules feature: Allows you to schedule the automatic activation or deactivation of program events (e.g.
alarm clock, reminder, and latch key). Refer to the Automation section for detailed information.
• Text Message center (Requires TotalConnect Service): The system allows you to send and receive text
messages.
• Web content (Requires TotalConnect Service): The system allows you to view and display web content
including Weather, News and Traffic reports.
• Video Camera Control: (Requires a WiFi communications device and a router) The system supports up to
20 video cameras and allows selection, control and viewing of video from a single camera.
Zones
• Your system's sensing devices have been assigned to various "zones." For example, the sensing device on
your entry/exit door may have been assigned to zone 01, sensing devices on windows in the master bedroom
to zone 02, and so on. These numbers appear on the display when an alarm or trouble condition occurs.
IMPORTANT SECURITY NOTICE
– 5 –

SYSTEM OVERVIEW

Features