Chime Mode - Honeywell L5200 Series User Manual

Lynx touch l5200 series security system
Hide thumbs Also See for L5200 Series:
Table of Contents

Advertisement

Chime Mode

Your system can be set to provide you with an audible alert of the opening of a door, while it is disarmed, by
using Chime mode. When activated, three beeps or a programmed chime will sound at the control whenever a
protected perimeter door is opened and the zone voice descriptor will be announced, if programmed. The Chime
mode can be changed only when the system is disarmed. Additionally, the faulted zone information will be
displayed on the Security Screen. Selecting the "Zones" icon displays the open protection points.
Turning Chime Mode On or Off
Ready To Arm
Arm Away
Arm Stay
Delay
10:18 AM June 8, 2010
Ready To Arm
Brightness
Contrast
Volume
Voice
Ringer
Selecting Chime Sounds
Armed Stay
Disarm
Quick Exit
10:18 AM June 8, 2010
Ready To Arm
2. Front
3. Garage
Door
Door
READY
96. Medical
95. Fire
READY
99. Police
READY
Chime
Standard
1. With the system in the disarmed state, select the "Settings"
Note: The Settings Screen display is variable dependent upon
Tools
Settings
Back
5200-100-033-V0
2. Select the "Chime" icon. The system toggles between "Off"
3. Select the "Save" button to save your new settings.
4. Select the  icon to return to the Security Screen.
Clean
Chime
Save
5200-100-034-V0
1. With the system in the disarmed state, select the "Zones" icon
2. Select the "Select All" button and scroll through the options
Zones
System
Message
Phone
More
5200-100-021-V0
3. Select the applicable zone from the displayed list and then
READY
4. Select the "Save" button to save your new settings.
5. Enter the Master User code on the displayed keypad.
READY
6. The system returns to the Security Screen.
Select
Save
Chime
5200-100-116-V0
SECURING THE PREMISES
icon from the second page of the Security Screen. The
system displays the Settings screen.
the features that have been programmed in your system.
and "On", and when selected the button turns green. When
"On" is selected, the Chime mode will be active.
from Security Screen. The system displays the Zones screen.
until "Select Chime" button appears.
select the "Chime" button to scroll through the available
chimes. Each chime sounds when selected.
– 31 –
Chime Mode

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx touch l5210 series

Table of Contents