Navigating Menus - Honeywell L5200 Series User Manual

Lynx touch l5200 series security system
Hide thumbs Also See for L5200 Series:
Table of Contents

Advertisement

LCD Display
LYNX Touch's Liquid Crystal Display (LCD) touch screen displays variable icons and text on "screens". The
screen displays status icons and associated text, the current time, system status information and menu choices.
The system status is displayed in a colored status bar along the top of the screen. The status bar color is
variable and will change between Red, Yellow and Green as the system status changes.
The Menu area includes a list of commands, or choices that apply to the current selection. The status area
provides information about various system events. A Home Screen is displayed whenever power is applied to
the system. In addition the Green (Ready) LED will be lit.
Note: The displayed screens may vary slightly depending upon the devices and services that are installed in or connected to your
system.
Navigation Keys
Navigating through the screens is accomplished by lightly touching the menu item on the touch screen. Once
activated, the control will take you to the next screen. Selecting the "Home" (cancel) key will return you to the
Home Screen at any time unless System Programming mode is active. Pressing the "
return you to the previous screen.
Note: You may find it convenient to adjust the volume setting before entering the Program (Tools) Mode. This will allow you to
clearly hear the feedback announcements or system beeps in the Programming Mode, of the system's built-in speaker. To
adjust the volume, select "More" on the "home Screen" and then select "Settings". Adjust the volume using the slide shown
on the Settings screen and then select "Save" to accept.
Home Screen
System Status is displayed at the top of the Home Screen. The time and date is displayed on the left third of the
screen and the Security, Automation, Video and Notices icons or "buttons" are displayed on the right side of the
screen. If your system is connected to Total Connect Services the Home Screen will display the time, date and
weather (as applicable) on the left third of the screen. Additionally News, Traffic and Notices selection icons or
"buttons" are displayed.
Note: Access to Text Messages, Weather, News and Traffic and other web content requires Total Connect Services. Ask your
Installer, which of these features have been programmed in your system.
Security – Provides access to Security Screen.
Automation – Provides access to the Device and Z-Wave Home Automation Management screen.
Video – Provides Access to the Video Control Screen
Notices – Provides access to the Dealer Notification Message Center (TotalConnect Services required)
News – Provides access to News Updates (TotalConnect Services required)
Traffic – Provides access to Traffic Updates (TotalConnect Services required)
5-Day Forecast – Provides access to Local 5-Day Weather forecast (TotalConnect Services required)
Weather – Provides local forecast and severe weather alerts (TotalConnect Services required)
Location – Provides access to program location information (City, State, Country, Zip Code) and enable
single day weather display and Sunrise/Sunset scheduling. (Requires GSM/Cellular or WiFi communication
module). Check with your installer to see if your system is equipped with a Communications Module.
Ready To Arm
1 :
2
35
PM
October 1, 2013
Mostly Sunny
68
F
Feels Like 71
F
5-Day Forecast
LYNX Touch Home Screen (Typical)
Security
Automation
News
Traffic
– 13 –
SYSTEM OVERVIEW

Navigating Menus

" Key or "Back" tab will
Video
Notices
5200-100-001-V0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx touch l5210 series

Table of Contents