Honeywell L5200 Series User Manual page 12

SYSTEM OVERVIEW
About the Display and Indicators
ICON TEXT
Low Battery
90 RF Jam
94 Phone
Line Cut
AC Loss
Automation
Fault *
Main
Garage Door
(Not
applicable)
Not
applicable)
DEFINITION
"Not Ready To Arm – System Trouble" is displayed in a yellow status bar along
the top of the screen. A low battery icon along with "Low Battery" is displayed
when the system's backup battery power is low.
Appears when the system has detected an RF jamming condition or excessive
interference.
Appears when the system has detected a loss of telephone service.
Displayed when the system has lost AC power. "Ready To Arm – System
Trouble" is displayed in a yellow status bar along the top of the screen.
Displayed when the system has detected a Z-Wave Device Failure
Displayed when the Garage Door has been opened. Ready To Arm – Fault" is
displayed in a yellow status bar along the top of the screen. (* Applicable Zone
Number)
Displayed in the upper left corner of the status bar. Indicates that the system is
connected to a WiFi source and the signal strength.
Displayed in the upper left corner of the status bar. Indicates that the system is
NOT connected to a WiFi source.
– 12 –