Quick Exit - Honeywell L5200 Series User Manual

Lynx touch l5200 series security system
Hide thumbs Also See for L5200 Series:
Table of Contents

Advertisement

Arming the System with no delay (Instant)
Use "Instant" with Stay mode when you are staying home and do not expect anyone to use the entrance door.
Use "Instant" with Away mode when the premises will be vacant for extended periods of time such as vacations,
etc. When armed with "Instant", the system will sound an alarm if a protected door or window is opened,
including the entrance door. You may leave through the entrance door during the exit delay period without
causing an alarm, but an alarm will sound as soon as someone reenters.
When armed "Instant" with Stay mode, the control beeps three times and displays the "Armed Stay Instant"
message. In addition, the red Armed indicator lights and the system announces "Armed Stay Instant –exit now".
When armed "Instant" with Away mode, the control beeps two times and displays the "Armed Away Instant"
message. If Exit Warning is enabled the system beeps continuously for the duration of the exit delay. In
addition, the red Armed indicator lights and the system announces "Armed Away Instant –exit now".
To Arm the System with No Delay (Instant)
Ready To Arm
Arm Away
Arm Stay
Delay
10:18 AM June 8, 2010

Quick Exit

If active, you can restart the exit delay at any time after the system has been armed in Stay or Away mode by
selecting the "Quick Exit" icon. This avoids having the user disarm then re-arm the system after allowing
someone to enter or exit. The system will re-arm once the exit delay expires.
Armed Stay
Disarm
Quick Exit
10:18 AM June 8, 2010
1.
2.
Note: The entry delay time is eliminated when "Instant" is selected.
Zones
System
Message
Phone
More
5200-100-014-V0
1.
Note: Quick Exit is active in Away mode when: Auto Stay mode is
Zones
System
Message
Phone
More
5200-100-021-V0
SECURING THE PREMISES
Select the "Delay" tab on the Security Screen. The icon
"toggles" and "Instant" is displayed.
Arm the system in the "Stay" or Away" mode normally.
Select the "Quick Exit" icon to restart the exit delay.
enabled and no entry/exit zone has been faulted during the exit
delay period.
– 23 –
Arming the System

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx touch l5210 series

Table of Contents