Honeywell L5200 Series User Manual page 56

Lynx touch l5200 series security system
Hide thumbs Also See for L5200 Series:
Table of Contents

Advertisement

USER FUNCTIONS
WiFi Configuration
Join a WPS (WiFi Protected Setup) Network
Ready To Arm
Users
Events
Date Time
Reminders
Ready To Arm
Scan Access Points
Manual Configure AP
WPS
Press the WPS button on the access point, then press this WPS button.
Automatic Video Recovery
Enrolling/Syncing Auxiliary Keypads
A router is required if you are using an approved mobile device as an Auxilary Keypad. The router must be
powered on and connected for WiFi operation to occur.
The LYNX Touch will support up to four Mobile Devices (or tablets) that can be used as Auxiliary Keypads. A
WiFi communication device and router are required. The "Keypad" button is used to enroll/sync the mobile
device with the control. Refer to the documentation provided with the device to enroll/sync the keypad.
Viewing or Deleting Enrolled Keypads
Ready To Arm
Users
Events
Date Time
Reminders
Ready To Arm
Keypad 120 MAC ID: XX:XX:XX:XX:XX
Keypad 121 MAC ID: XX:XX:XX:XX:XX
Keypad 122 MAC ID: XX:XX:XX:XX:XX
Keypad 123 MAC ID: XX:XX:XX:XX:XX
Test
Keypad
Slide Show
WiFi Config
Back
5200-100-036-V0
5200-100-073-V1
Test
Keypad
Slide Show
WiFi Config
Back
5200-100-036-V0
Delete
5200-100-077-V0
1. At the Master User screen select the WiFi Config icon. The
system displays the WiFi options screen.
Note: For WPS operation, press the WPS button on the access
point (router) first. Then press the WPS button on the
control.
2. Select the "WPS" button. The system displays "Please Stand-
by for WPS Operation..."
3. If the operation is successful, the system displays "Device
has been successfully added to the network." If the operation
is unsuccessful the system displays "Failed Operation.
Device not added to the network."
4. Select "OK".
1. At the Master User screen select the Keypad icon. The
system displays the WiFi devices screen.
2. To delete a mobile device (auxiliary keypad) select the
keypad to be deleted.
3. Select the "Delete" button.
Note: Defaulting the system will not automatically delete any
associated keypads.
– 56 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx touch l5210 series

Table of Contents