Honeywell L5200 Series User Manual page 45

Ready To Arm
Name
Type
None
Location
Ready To Arm
City
State
Ready to Arm ...
1
4
Enter Time
10:21 AM
7
AM / PM
Clear
Ready To Arm
Name
Lights
Type
Scene
Start Time Time Randomization
12:00 AM
Frequency
None
Save
5200-100-057-V0
Country
Zip Code
0
Save
5200-100-061-V0
2 3
6
5
8 9
Save
0
5200-100-049-V0
Frequency
Daily
Scenes
No
Save
5200-100-114-V0
4. Select "Name". The system displays a keypad.
5. Enter a name (up to 13 digits long) for the scheduled function
on the displayed keypad then select "Done".
6. Select "Frequency" then select one of the following displayed
options:
None
Daily
Weekly
Sunrise
If Sunrise or Sunset is selected, select "Location" and
proceed to step 7, otherwise proceed to step 8. If Total
Connect Services are enabled proceed to step 8.
7. Select "City", "Country", "State" and "Zip Code" and enter the
required information on the displayed keypad then select
"Done". Select "Save" when all fields are complete. Proceed
to step 14.
8. Program the following options based upon the Frequency
selected in step 6:
Once Date/Start Time/End Time
Daily Start Time/End Time
Weekday Start Time/End Time
Weekly Start Time/End Time/Day of the Week,
Monthly Start Time/End Time/Day of the Month
9. Select "Type" then scroll through and select one of the
following options:
None
Auto Night Stay
Auto Stay
Rules
Disarm Notification
Scene (displayed when Z-Wave has been enabled)
10. If Auto Stay is selected, select "Clear" then enter a 4-digit
time on the displayed keypad then select "Save". If "Rules" is
selected proceed to Step 11. If "Disarm Notification" is
selected proceed to Step 12. If "Scene" is selected proceed
to Step 14.
11. Select "Rules" then select a Rule from the displayed list
(Rules 1 through Rules 20).
12. Enter a Start Time and End Time on the displayed keypad
then select "Save".
13. Select the "" button to return to the Automation
programming screen or the Home key to return to the Home
Screen.
14. Select "Scenes". Select the desired scene from the displayed
list.
15. Enter a Start Time and End Time on the displayed keypad
then select "Done".
16. If "Daily", "Weekday", "Weekly" or "Monthly" was selected for
"Frequency", the Randomization field is displayed. Select
"Randomization", the system toggles between "No" and Yes".
Note: If using the Randomization feature scheduled events
should not be programmed within one hour of each other.
17. Select "Save". The system displays to the list of programmed
Schedules.
18. Select the "" button to return to the Automation
programming screen or the Home key to return to the Home
Screen.
– 45 –
USER FUNCTIONS
Once
Weekday
Monthly
Sunset
Automation