Summary Of Audible & Visual Notifications; Audible Soundings - Honeywell L5200 Series User Manual

Lynx touch l5200 series security system
Hide thumbs Also See for L5200 Series:
Table of Contents

Advertisement

SUMMARY OF AUDIBLE & VISUAL NOTIFICATIONS

Audible Soundings

SOUND
CAUSE
INTERRUPTED
FIRE ALARM (3 beeps)
OR
CARBON MONOXIDE ALARM (4 beeps)
CONTINUOUS
BURGLARY/AUDIBLE EMERGENCY ALARM
ONE SHORT BEEP
a. SYSTEM DISARM
(not repeated)
b. SYSTEM ARMING ATTEMPT WITH AN
OPEN ZONE.
c. BYPASS VERIFY
ONE SHORT BEEP
a. SYSTEM IS IN TEST MODE
(once every 45 secs)
b. LOW BATTERY AT A TRANSMITTER
c. SYSTEM LOW BATTERY
d. FAIL TO COMMUNICATE
TWO SHORT
ARM AWAY
BEEPS
THREE SHORT
a. ARM STAY OR INSTANT
BEEPS
b. ZONE OPENED WHILE SYSTEM IS IN
CHIME MODE.
RAPID BEEPING
a. TROUBLE
b. MEMORY OF ALARM
SLOW BEEPING
a. ENTRY DELAY WARNING
b. EXIT DELAY WARNING
Additional Announcements:
The system will announce the following primary messages, depending on the system's status at the time:
Disarmed–Ready to Arm [check system][chime]
Disarmed [not ready to arm][chime]
Armed [away] [stay] [instant] [check system] [exit now]
ANNOUNCEMENT*
fire alarm + zone voice descriptor
OR
Carbon monoxide alarm + zone voice descriptor
(Voice descriptor is interlaced with the sounder and sounds every 45
seconds)
alarm + zone voice descriptor
(Voice descriptor is interlaced with the sounder and sounds every 45
seconds)
a. disarmed–ready to arm
b. disarmed–not ready to arm
c. zones bypassed
a. no announcement
b. low battery + zone voice descriptor
c. system low battery
d. check system
armed away [instant] – exit now
a. armed stay [instant] – exit now
b. zone voice descriptor
a. fault + zone voice descriptor
b. fire alarm or alarm + zone voice descriptor
a. disarm system now
b. armed [away] [instant] – exit now
– 66 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx touch l5210 series

Table of Contents