Wifi Configuration - Honeywell L5200 Series User Manual

USER FUNCTIONS

WiFi Configuration

View/Join Available WiFi Networks
Ready To Arm
Users
Events
Date Time Reminders
Ready To Arm
Scan Access Points
Manual Configure AP
WPS
Press the WPS button on the access point, then press this WPS button.
Automatic Video Recovery
Ready To Arm
SSID = Vtek, RSSI = -62dbm
SSID = JimC, RSSI = -66dbm
SSID = Toms_net, RSSI = -86dbm
Edit Scan
Ready To Arm
Name SSID
Toms_net
Security Network Type
WPA1 Infrastructure
Key
* * * *
Join
Test Keypad
Slide Show WiFi Config
Back
5200-100-036-V0
5200-100-073-V1
5200-100-074-V0
5200-100-075-V0
1. At the Master User screen select the WiFi Config icon. The
system displays the WiFi options screen.
2. Select the "Scan Access Points" button to view the available
networks. The available networks are displayed. Use the
down  arrow to scroll to the next page of options. Use the
 arrow to return to the previous page.
3. Select the desired Network and then select the "Edit" button.
The network information is displayed. If a password is
required, select the "Key" button and enter the password.
4. Select the "Join" button. A confirmation screen will be
displayed.
5. Select the "Save button, then select the "" button as
required to return to the Master User screen.
– 54 –