Connecting To The Camera; Resetting The Camera; Administrator/User Privileges; Lens Adjustment - avertX HIGH DEFINITION NETWORK DOME CAMERA User Manual

CONNECTING TO THE
CAMERA
1. Locate the camera on the IP Finder list.
2. Double-click the camera to open the Viewer software in your web
browser.
3. Log in to the camera with the appropriate User Name and
Password.
Note
The default User name is Admin and the default Password
is1234. The username and password are case sensitive

Resetting the Camera

If it is necessary to reset the camera to the factory default settings, hold
down the Reset button (see Camera Overview) for 30 seconds. This will
return all settings, including network setup, to the factory default. The IP
address of the camera will return to 192.168.0.250.

Administrator/User Privileges

The Administrator account has the authority to configure the IP camera
and authorize users' access to the camera. The User accounts have
access to the camera with limited authority.
31498AA

Lens Adjustment

The Viewer software will display an image from the camera on the
Home tab. Adjust the camera's focus to produce a clear image.
1. Remove the screws from the camera dome cover.
2. Loosen the focus fixed screw and rotate the lens counter clockwise
to adjust the focus. Loosen the tilt fixed screw and adjust the
camera's tilt angle.
15