Video OCX Protocol
On the Video OCX protocol page, you can select different protocols for
streaming media over the network. In the case of multicast networking,
you can select the Multicast mode.
Video OCX protocol setting options include:
•
RTP over UDP
•
RTP over RTSP (TCP)
Select a mode according to your data delivery requirements. If you are
transmitting over the internet using a router and port forwarding, you will
need to use RTP over RTSP (UDP). You will also need to forward the
RTSP port to the camera (see the network setup page to find the RTSP
port).
Multicast Mode
1.
Enter all required data, including multicast IP address, H.264 video
port, MJPEG video port, audio port and TTL into each box.
2.
Click Save to confirm the setting.
31498AA
•
RTSP over HTTP
•
MJPEG over HTTP
Frame Rate Control
Setting the camera to transmit fewer frames can save bandwidth. Use
the Frame Rate Control to adjust the camera's frame settings if
necessary.
31