View User Information; Factory Default - avertX HIGH DEFINITION NETWORK DOME CAMERA User Manual

View User Information

The Administrator can view each user's login information and privileges
on the View User Information page.
View User Login Information
All users for the camera are listed under User information. The
example below show that the Admin password is 1234 and there is one
user named User with the password 4321.
View User Privilege
Select a user account from the list and click get user privacy to view
the permissions for the user account.
31498AA

Factory Default

Use the factory default page to reset the IP Camera to factory default
settings if necessary.
Set Default
Click Set Default to reset the IP camera to the factory default settings.
The system will restart after 30 seconds.
Note
The camera's IP address will be restored to the default IP
address.
Reboot
Click Reboot to restart the IP camera without changing the current
camera settings.
27