Network - avertX HIGH DEFINITION NETWORK DOME CAMERA User Manual

Network

You can choose to use a fixed IP address or a dynamic IP address
(assigned by a DHCP server or router) for the camera.
Get IP address automatically (DHCP)
The camera comes preconfigured with a fixed IP address, selecting Get
IP address automatically requires a router or DHCP server to assign
an IP address to the camera.
Note
Every network device has a unique Media Access Control
(MAC) address that can be used for identification. The MAC
address is located on the bottom of each camera, and on the
box label (AvertX IP Finder also displays the MAC address for
identification). Record your camera's MAC address for
identification in the future.
20
Use fixed IP address
To set up a new static IP address:
1. Select the Use fixed IP address option.
2. Type a new IP address in the IP address box.
3. Type a new address in the Default Gateway box.
4. Click Save to confirm the new setting.
When using static IP address to log in to the IP Camera, you can
access it either through the AvertX IP Finder software or type the IP
address directly in the Address bar of your internet browser.
General
•
IP address – The IP Address is necessary for network
identification.
•
Subnet mask – Used to determine if the destination is in the
same subnet. The default value is 255.255.255.0.
•
Default gateway – Used to forward frames to destinations in
different subnets or for internet access.
•
Primary DNS – The primary domain name server that
translates hostnames into IP addresses. This is usually the
gateway or router address.
•
Secondary DNS – A secondary domain name server that
backups the primary DNS.
•
Web Server port – Defines the port that Internet Explorer uses
to connect over the web and view video. If this port is changed
then the new port must be defined when attempting to web
connect (ex: if your camera's IP address is 192.168.0.100 and
you change the web port to 8001, then you must type
http://192.168.0.100:8001 in your browser).