Software Upgrade
28
Upgrading the Camera Viewer Software
Note
Make sure the new firmware file is available before starting a
software upgrade. Do not change the file name, or the system
will not be able to update to the new firmware.
1.
Click Browse and select the firmware file.
2.
Select the file type from the list under Step 2.
3.
Click Upgrade. The system will check the upgrade file, and then
upload the file. The upgrade status bar will display on the page.
When the upgrade process is complete the viewer will return to the
Home page. After updating it is important to make sure the camera
viewer is updated:
4.
Close the browser.
5.
Go to the Windows Control Panel and double-click Add or
Remove Programs. Locate the Camera Viewer software on the
Currently installed programs list, and click Remove to uninstall
the previous software version.
6.
Open the internet browser again and login to the IP camera. The
system will automatically download the new version of the Camera
Viewer software.