Table of Contents
Advertisement
S
S
UPER
ERVER 5016T-MRB/5016T-MR-LN4B User's Manual
2-4
Installing the System into a Rack
(Rack hardware optional)
This section provides information on installing the SuperServer 5016T-MRB/5016T-
MR-LN4B into a rack unit. If the system has already been mounted into a rack,
you can skip ahead to Sections 2-5 and 2-6.
Basic Installation Procedure
The 5016T-MRB/5016T-MR-LN4B server comes with two rack mounting brackets,
which are located on each side at the front of the chassis. To mount the system
into a rack, simply screw these brackets directly to the front of the rack (two screws
for each bracket).
Installing with Rackmount Kit
This section is only for customers that have the optional rack mount kit (CSE-PT8).
Each of these assemblies consist of two sections: an inner rail that secures to the
chassis and an outer rail that secures directly to the rack itself (see Figure 2-1).
This is a guideline for installing the unit into a rack with the optional rack kit. You
should also refer to the installation instructions that came with the rack unit you
are using. Be aware that there are a variety of rack units on the market, which may
mean the assembly procedure will differ slightly.
Figure 2-1. Identifying the Sections of the Rack Rails
A
2-4
B
Advertisement
Table of Contents
