5-7
PCI Expansion Cards
The SC512-200 chassis uses a riser card to accommodate one add-on card (CSE-
RR1U-E16 for a PCI-E x16 card.
Installing a PCI Expansion Card
1.
After powering down the system, remove the PCI slot shield.
2.
Fully seat the riser card into the slot, pushing down with your thumbs evenly
on both sides of the card.
3.
Install the expansion card into the riser card.
4.
Finish by using a screw to secure the top of the card shield to the chassis.
5.
The PCI slot shield protects the serverboard and its components from EMI
and aid in proper ventilation, so make sure it is always in place.
Chapter 5: Advanced Serverboard Setup
5-11