S
S
UPER
ERVER 5016T-MRB/5016T-MR-LN4B User's Manual
Figure 2-5. Installing the Server into a Telco Rack: Basic
2-5
Checking the Motherboard Setup
After you install the 5016T-MRB/5016T-MR-LN4B in the rack, you will need to open
the unit to make sure the motherboard is properly installed and all the connections
have been made.
Accessing the Inside of the System (Figure 2-7)
1.
Grasp the two handles on either side and pull the unit straight out until it
locks (you will hear a "click").
2.
Remove the screws from the lips on either side of the chassis top cover,
located at the front of the chassis.
2-8