Table of Contents
Advertisement
6.
Install the DVD-ROM into the module and secure it back into the chassis with
the screw you removed.
7.
Replace the DVD-ROM drive and the top cover when fi nished.
Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the
!
Supermicro Web site at http://www.supermicro.com/products/nfo/fi les/
storage/SAS-1-CompList-110909.pdf
Figure 6-4. Removing the SATA/DVD-ROM Drive
Figure 6-5. Attaching the Side Rails and Backplane PCB
Chapter 6: Advanced Chassis Setup
6-5
Advertisement
Table of Contents
