Table of Contents
Advertisement
S
S
UPER
ERVER 5016T-MRB/5016T-MR-LN4B User's Manual
1-3
Server Chassis Features
The SC512-200 is a mini 1U rackmount server platform confi guration. The following
is a general outline of the main features of the SC512-200 chassis.
System Power
When confi gured as a SuperServer 5015B-MF, the SC512-200 chassis includes a
single 200W power supply.
SATA Subsystem
The SC512-200 chassis was designed to support one internal 3.5" Serial ATA
hard drive. This SATA drive is not hot-swappable; power must be removed from
the system before installing or replacing. ATA/100 IDE drives can be alternately
supported.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA drives.
Control Panel
The control panel on the SC512-200 provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activity,
overheat warning and fan failure. A main power button and a system reset button are
also included. Below the control panel are two USB ports for front side access.
Rear I/O Panel
The rear I/O panel on the SC512-200 provides one motherboard expansion slot, one
COM port (another is internal), two USB ports, PS/2 mouse and keyboard ports, a
graphics port and two Gb Ethernet ports.
Cooling System
The SC512-200 chassis has an innovative cooling design that features one 10-cm
blower-type system cooling fan. The blower fan plugs into a chassis fan header
on the motherboard and an air shroud channels the airfl ow to effi ciently cool the
processor area.
A fan speed control setting in BIOS allows fan speed to be determined by system
temperature [the recommended setting is 3-pn (Server)].
1-4
Advertisement
Table of Contents
