Removing The Heatsink - Supero SuperServer 5016T-MRB User Manual

S S
UPER ERVER 5016T-MRB/5016T-MR-LN4B User's Manual

Removing the Heatsink

Warning: We do not recommend that the CPU or the heatsink be re-
moved. However, if you do need to remove the heatsink, please follow the
!
instructions below prevent damage to the CPU or other components.
1. Power down the system and
unplug the power cord from the
power supply.
2. Disconnect the heatsink fan's
wires from the fan header.
3. Using a screwdriver, loosen and
remove the heatsink screws
from the motherboard in the
sequence as show in the previ-
ous section (#1 and #2 followed
by #3 and #4.
4. Hold the heatsink as shown
in the picture on the right and
gently wiggle it to loosen it from
the CPU. (Do not use excessive
force when doing this.)
5. Once the heatsink is loose,
remove it from the CPU socket.
6. To reinstall the heatsink, clean
the surface of the CPU and
the heatsink to get rid of the
old thermal grease. Reapply
the proper amount of thermal
grease to the surface of the
CPU then reinstall the heatsink.
Screw#1
5-8
Screw#2