Power Computing PowerWave 604 User Manual page 50

Upgrading Your Computer
3.
Slide the contacts straight into the slot and make sure the contacts are
Þrmly seated in the slot.
DonÕt force the DIMM module into the slot; if the motherboard starts bending
signiÞcantly, pull the DIMM out, reposition it, and try again.
Note: Some DIMM modules have sharp, square edges which are difÞcult to get into the
DIMM slot. If you have repeated difÞculty getting the DIMM into the slot, you may need to
return the DIMM modules to your vendor for replacement.
4.
If the DIMM module is seated, the DIMM lever should rise so it lines up with
the other levers.
5.
When you are Þnished, replace the end panel (if you are installing RAM on
a tower system), and replace the cover.
Adding VRAM
The video memory available to monitors connected to the standard PCI monitor ports is
increased by installing video memory modules. Your computer is equipped by default with 2
MB of VRAM, which can be expanded to 4 MB by adding a 2 MB VRAM module.
Touch the metal plate over the hard disk drive to discharge any static
CAUTION!
electricity that might have built up on your clothes or body.
Use a grounding strap and handle memory modules by the non-metallic
edges only.
30
PowerWave 604 UserÕs Guide
For Technical Support, Call 1-800-708-6227