Required Tools - Power Computing PowerWave 604 User Manual

Rails for mounting internal devices are available from Power Computing for a nominal fee;
contact our Sales Department at 1-800-999-7279. Rails, as well as adapter trays for installing
3.5 inch drives in the 5.25 inch bays are also available at most computer parts stores.
The PowerWave 120/132/150 uses an internal SCSI (Small Computer Systems Interface) bus
to connect internal drives. For a more detailed discussion of how the SCSI bus on your
computer is set up, see ÒUsing SCSI devices,Ó starting on page 47. Pay particular attention to
the discussion of SCSI termination, discussed in ÒEnsuring proper terminationÓ on page 48.

Required tools

Small Phillips-head screwdriver
Drive rails, if not supplied with the drive
3.5 inch to 5.25 inch drive adapter tray, if you are installing a 3.5 inch drive.
Software drivers, if required
For Technical Support, Call 1-800-708-6227
Upgrading Your Computer
5.25 inch internal
storage bays
PowerWave 604 UserÕs Guide
33