Problems Starting Up - Power Computing PowerWave 604 User Manual

front panel
power button
reset button
When the computer Þnishes its start-up procedure, you should see the Mac OS desktop.
If you see a blinking question mark, you need to install the system software on your hard
disk. See Appendix C, ÒInstalling System Software,Ó on page 63 If you see a blank
screen or anything not already described, see the section following this one, ÒProblems
starting up.Ó
When you need to shut your computer down, follow the instructions in ÒShutting downÓ on
page 13.

Problems starting up

If you see a blank screen when you start up, check the following items to identify the source
of the problem:
First try rebooting by pressing the reset button on the front of the computer.
Are the computer and monitor plugged in? If they are plugged into a power strip, is it
turned on?
Are the computer and monitor turned on? The power button on the front of the computer
should be lighted. Most monitors also have power lights.
Is the video cable securely connected to the monitor and computer? (If you need to
reattach the cable, Þrst turn off the computer and monitor.)
Are the keyboard and mouse properly connected to the computer? (If you need to
reconnect them, Þrst turn off the computer to avoid damage.)
For Technical Support, Call 1-800-708-6227
PowerWave 604 UserÕs Guide
Getting Started
keyboard
power
key
9