Power Computing PowerWave 604 User Manual page 44

Upgrading Your Computer
Ð If you are installing a PCI card, the card bracket tongue and screw hole should line up
Ð If you are installing a NuBus card, the hole in the cardÕs bracket should snap into
7.
If you are installing the card in a tower system, replace the end cover.
You do know where those screws are, donÕt you?
8.
Replace the computer cover and tighten the thumb screw.
To prevent electrical shock, always replace the cover before turning on the
WARNING!
computer.
24
PowerWave 604 UserÕs Guide
with the groove and screw hole on the slot.
Replace and tighten the screw you removed from the slot cover.
place over the tab on the back panel.
For Technical Support, Call 1-800-708-6227