Table of Contents
Advertisement
4/32 SAN Switch models
The HP StorageWorks 4/32 SAN Switch models include:
•
HP StorageWorks 4/32 SAN Switch Base ships with 16 ports activated and
includes Zoning and Advanced Web Tools as standard software components.
•
HP StorageWorks 4/32 SAN Switch Full ships with 32 ports activated and
includes Zoning and Advanced Web Tools as standard software components.
•
HP StorageWorks 4/32 SAN Switch Power Pack ships with 32 ports activated
and includes a Full Fabric license, Advanced Web Tools, and Zoning as standard
software components. It also includes integrated licenses for all optional
management tools (including Advanced Performance Monitoring, ISL Trunking,
Extended Fabric and Fabric Watch).
NOTE:
To add ports, see
4/32 SAN Switch features
The HP StorageWorks 4/32 SAN Switch provides the following features:
•
Air-cooled 1U chassis
•
Thirty-two fixed autosensing 1, 2, or 4-Gb/s FC ports with the following
characteristics:
• Automatic negotiation to the highest common speed of all devices connected
to the port
• Port interfaces compatible with SFP transceivers, both SWL and LWL
• Universal and self-configuring ports capable of becoming an F_Port (fabric
enabled), FL_Port (fabric loop enabled), or E_Port (expansion port)
•
One RS-232 serial port designed to connect to a DTE port
•
One 10/100 Mb/s Ethernet port with an RJ-45 connector
•
Two redundant, hot-pluggable, universal AC power supplies
•
Three redundant, hot-pluggable fans
4/32 SAN Switch chassis
This section provides an illustration of the front (port side) and rear (nonport side) panels
of the SAN Switch chassis and identifies the components of each side.
20
Overview
Activating additional 4/32 SAN Switch ports
on page 31.
Advertisement
Table of Contents
