Assembling The Outer Rails (Hp System/E Rack); Number Of Screws Required To Assemble The Inner Rails - HP AA-RWF3A-TE Installation Manual

5.
Depending on the device model, the SAN Switch Rack Mount Kit requires different
screw types for securing the inner rails. Use
screw type for your specific switch.
CAUTION:
Do not use any screws other than those provided. Using longer screws
than those provided can cause damage to internal components.
Table 5 Number of screws required to assemble the inner rails
SAN Switch
2/32
4/8, 4/16
4/32
4/64
4/32B
46
Installing and configuring SAN Switches
Figure 14 Assembling the outer rails (HP System/e Rack)
#8-32 x 5/16-inch screws
N/A
Ten (Five per rail)
Ten (Five per rail)
Ten (Five per rail)
Six (Three per rail)
Table 5 to determine the number and
#8-32 x 3/16-inch screws
12 (Six per rail)
N/A
N/A
N/A
N/A