Table of Contents
Advertisement
Table 29 Laser data transmission ranges for the 4/32B SAN Switch
Port speed
1 Gb/s
2 Gb/s
4 Gb/s
FC port specifications
The following sections summarize FC port specifications.
4/8 and 4/16 SAN Switch FC port specifications
The FC ports are compatible with SWL and LWL SFP transceivers. The strength of the
signal is determined by the type of transceiver in use.
The ports operate at 1, 2, and 4 Gb/s and autosense to the highest speed of all
attached devices.
The ports meet all required safety standards. For more information about these
standards, see
4/32 and 4/64 SAN Switch FC port specifications
The FC ports are compatible with SWL, LWL, and extended long wavelength (ELWL) SFP
transceivers. The strength of the signal is determined by the type of transceiver in use.
140
SAN Switch technical specifications
Cable size
Short wavelength
(microns)
50
500 m (1,640 ft)
62.5
300 m (984 ft)
9
N/A
50
300 m (984 ft)
62.5
150 m (492 ft)
9
N/A
50
150 m (492 ft)
62.5
70 m (230 ft)
9
N/A
Regulatory compliance
Long
wavelength
N/A
N/A
10 km (6.2 miles)
N/A
N/A
10 km (6.2 miles)
without an HP Extended
Fabrics license
50 to 100 km with an
HP Extended Fabrics
license
N/A
N/A
N/A
notices.
Extended
long wave
length
N/A
N/A
40 km (24.8
miles)
N/A
N/A
40 km (24.8
miles)
N/A
N/A
N/A
Advertisement
Table of Contents
