Table of Contents
Advertisement
Scale: 1/4" = 1"
2
1
MRO25017a
2. Captive screw
1. Fan assembly
Figure 32 Installing the fan assembly in a 4/32 SAN Switch
CAUTION:
Do not force the installation. If the fan assembly does not slide in easily,
make sure that it is oriented correctly before continuing.
6.
Verify that the Fan Status LED does not display a steady amber light for more than
five seconds, which indicates a fault (see
Table 19
on page 97).
98
Installing field-replaceable units
Advertisement
Table of Contents
